Outdoor Power Equipment, Small Engine, Lawn Mower Repairs, Troubleshooting and Safety
SEARCH THIS SITE:
Removal of Carb from Honda GX390 QA2X General Purpose Engine
-
- #1. Air cleaner cover
Remove air cleaner cover by loosening wingnut (#1).
-
- #2. Air filter base
Air filter base after taking off air cleaner cover and and filter (#2).
-
- #3. Intake elbow with gasket
Intake elbow after removing air cleaner base (#3). Rubber gasket is visible.
-
- #4. Disconnect breather tube
Slide crankcase breather tube off intake elbow (#4).
-
- #5. Close fuel and choke, remove two nuts
Position choke lever and fuel valve lever to the left. Remove two nuts (#5) and one screw (#6) to remove intake elbow.
-
-
- #6. Remove intake elbow screw
After taking off the intake elbow the spacer/gasket can be seen (#7).
-
- #7. Intake elbow has been removed
Remove fuel line from carb (#8).
-
- #8. Disconnect fuel line
Throttle link and spring before removal (#9).
-
- #9. Throttle link spring connection
Unhook throttle link spring. Position throtle lever toward closed position and lift link out of lever (#10).
-
- #10. Disconnect throttle link
Slide carb away from engine and off carb mounting studs.